Astronaut relaxing near a SpaceX Starship spaceport

Picture of the Day 30/03/2021 - Astronaut leaning against his Mars rover derived from a retro car near a SpaceX Starship spaceport by American video game concept artist Darren Bacon in collaboration with parody account Bored Elon.

SpaceX Starship landing on Mars by Kendall Dirks

Picture of the Day 11/03/2021 - SpaceX's crew Starship landing on Mars by young American 3D artist Kendall Dirks. More of his art here.

SpaceX 100+ Starship fleet arriving to Mars

Video animation with SpaceX's colonial fleet of 100+ Starships arriving to Mars by Austrian 3D environment artist Roger Bootsma. More of his art here.

Updated design of #dearMoon Starship (2021)

On March 3 dearMoon Project opened application process for 8 crew member spots on SpaceX's first crewed deep space mission - #dearMoon Starship flight around the Moon scheduled for 2023. Applications are open for everyone now, not just the artists as originally was planned. The applications page contains some official renders of Starship's updated design with the most visible differences being in main window design:

SpaceX has downselected 7 potential Mars landing sites for Starship

On September 2019 it was revealed SpaceX has selected several Starship candidate landing sites on Mars. The candidate sites were located in Southern Arcadia Planitia East of Erebus Montes and one in Phlegra Montes.

Since then SpaceX has conducted several workshops with the Mars science community to evaluate and narrow the list of candidate landing sites. All the sites must fit several criteria:

1. close to significant deposits of water/ice, a required resource for in situ propellant production and a consumable to support habitation;
2. elevation below -2 km (with respect to the MOLA geoid) that can support the delivery of large payloads, with -3 km preferred;
3. latitude must be <40° for solar power and thermal management, and closer to the equator is desirable;
4. multiple separate landing locations spaced within a few km of each other, to support the multiple missions needed to grow an outpost;
5. slopes should be <5° over a 10 m length scale and the chance of impacting a rock greater than 0.5 m high (1 m diameter) should be <5%;
6. landing site must be radar reflective to enable measurement of the distance to the surface, and it must be load bearing to support the spacecraft at touchdown.

Recently an abstract with the conclusions has been published (the results of the study will be presented in two weeks, at the 52nd Lunar and Planetary Science Conference), pointing out 4 prime and 3 secondary potential Starship landing sites selected for further study and located in Phlegra Montes, Erebus Montes and Southern Arcadia Planitia:

• PM-1 has the lowest latitude and elevation of the Phlegra Montes sites, a clear association with LDAs (local ice deposits expressed as lobate debris aprons), well developed polygons (one of the indicators of ice-related morphologies), and has the highest SWIM (Subsurface Water Ice Mapping) score for geomorphic indicators of ice;
• AP-1 (Arcadia Planitia) appears to be one of the safest sites and has a moderate combined SWIM score for ice;
• AP-9 has the thickest ice from radar returns (of the Arcadia Planitia sites) and geomorphology indicating shallow ice. It has the highest combined SWIM score for ice, but appears slightly rocky and rough;
• EM-16 has a clear association with an LDA with nearby brain terrain and the strongest radar return for shallow ice and the highest combined SWIM score of the Erebus Montes sites;
• AP-8 (Arcadia Planitia) appears to be one of the safest sites and has the highest neutron and combined SWIM scores for ice;
• EM-15 (Erebus Montes) is associated with a prominent but less extensive LDA, has well developed polygons, nearby brain terrain and appears smooth;
• PM-7 is adjacent to lineated valley fill (attributed to glacial flow) and appears to be the safest of the Phlegra sites.

We highlighted selected ★ prime and ★ secondary sites on the map:

Animation of SpaceX Starship interior concept by DeepSpaceCourier

Two brothers from DeepSpaceCourier have created an animation of their concept for SpaceX's Starship interior. The animation takes through each level of the Starship showing it from 1st person perspective.

Common room:

Utilities:

Cutaway schematic of SpaceX Starship interior by Tom Dixon

British product design student Tom Dixon, in collaboration with the local Starship photographer Austin Barnard, has created a cutaway schematic of SpaceX's cargo Starship interior structure, as it can be observed at SpaceX's Starship production and testing facility in Boca Chica, Texas.

Some more speculative Starship interiors for crewed flights by SpaceX fans:

• Starship interior concept for 20 to 40 passengers by Paul King + VR tour
• Starship interior concept for 100 passengers by Joseph Lantz
• Animation of Starship interior concept by DeepSpaceCourier
• Starship interior concept for 64 passengers by Erik Corshammar & YouTuber 'smallstars'
• Cutaway diagram of Lunar Starship by Rocket Posters
• Starship interior concept for 100 passengers by Rick Kiessig & Michel Lamontagne
• Starship interior concept by Jim Murphy
• Speculative internal structure of Starship by William Falconer-Beach
• Speculative internal layout of Starship by Michel Lamontagne
• Cutaway diagram of Starship by Julian Schindler
• Cutaway diagram of Big Falcon Ship by Nick Oberg

SpaceX Starship Super Heavy launch complex by Dale Rutherford

Picture of the Day 28/12/2020 - SpaceX's launch complex with several launch towers for Starship Super Heavies by Scottish photographer & designer Dale Rutherford. More of his art here.

Video footage of Starship SN8 high-altitude test flight

Today SpaceX's Starship SN8 test vehicle performed first high-altitude test flight for Starship development program. The test was successful, reaching several milestones, including successfully performing its distinctive "skydiver" belly flop maneuver, till the very end of the flight when Starship SN8 crashed and exploded on the landing pad. SpaceX has already almost completed SN8's successor - Starship SN9. Here is full footage of today's flight from SpaceX's official livestream.

Starship is the second (spacecraft) stage of the fully reusable two-stage super heavy-lift launch vehicle currently developed by leading NewSpace company SpaceX. The main purpose of building such a large rocket with more than double the power of Saturn V is to enable the colonization of Mars. But Starship will be capable to do a lot of different tasks – to place satellites or space stations in orbit, ferry passengers to space stations or the Moon and even ferry passengers or cargo between any destinations on Earth within an hour.

Scott Manley's technical analysis of the flight:

Lift-off of the Starship SN8 by Tony Bela

New illustration depicting lift-off of SpaceX's Starship SN8 test vehicle from company's launch site in Boca Chica, Texas by Australian space illustrator Tony Bela. Yesterday Starship SN8 12.5km test flight was scrubbed but there is a new attempt scheduled today.

You can view Tony's infographic of the upcoming Starship SN8 flight here and his incredibly detailed posters of the flight here.

Painting of SpaceX Starship SN8 on launch stand by Colin Doublier

Picture of the Day 7/12/2020 - Painting of SpaceX's Starship SN8 on launch stand at SpaceX's launch site in Boca Chica, Texas before its 12.5km test flight by French urban artist Colin Doublier. More of his art here. Starship SN8 is the first full scale flight-ready Starship prototype equipped with a nose cone, fins and three Raptor engines. Starship SN8 is accompanied by Starship's first sub-scale prototype - Starhopper - in this painting.

Incredibly detailed posters of SpaceX Starship SN8 15km test flight by Tony Bela

Australian space illustrator Tony Bela has created a set of four incredibly detailed sequential posters of the upcoming 15km test flight of SpaceX's Starship SN8 test vehicle. You can view Tony's infographic of the upcoming Starship SN8 flight here.

Starship SN8 on the launch stand at Boca Chica, Texas

Starship SN8 launch

Leaked official render of SpaceX Starship Super Heavy at launch pad in Boca Chica, Texas

Today YouTuber EpicDaniel posted a video which was allegedly uploaded on the official SpaceX YouTube channel on September, 28th 2019 and removed later. The video shows Starship development progress at the time and features a render of Starship Super Heavy at launch pad in Boca Chica, Texas. Here is a screen-stitch created by Austin Barnard from the video:


Note that the (possibly official) render is more than a year old now and thus outdated.

Here is full video reuploaded by EpicDaniel today:

SpaceX Starship interior concept for 64 passengers

Swedish space designer Erik Corshammar (Erc X) and YouTuber smallstars have created their concept of SpaceX's Starship interior layout for 64 passengers.





Deck 0 - cargo hold

Deck 1 - egress options & EVA spacesuits

Deck 2 & 3 - 32 crew bunks in each deck

Sketch of SpaceX Starship SN8 15km flight by Colin Doublier

French urban artist Colin Doublier has created his sketch of SpaceX's Starship SN8 upcoming 15km test flight. More of his art here. The flight will (hopefully) happen in next week and Starship SN8 is the first full scale flight-ready Starship prototype equipped with a nose cone, fins and three Raptor engines.

SpaceX Starship SN8 15km test flight infographic by Tony Bela

Australian space illustrator Tony Bela has created an infographic of the upcoming 15km test flight of SpaceX's Starship SN8 test vehicle, considering the information publicly available and the observations by fan community at SpaceX's test facility in Boca Chica, Texas.

You can download the infographic in its original resolution here.

Here is his poster of Starship SN8 during lift-off and when performing its "skydiver" belly flop maneuver:

You can download the poster in its original resolution here.

SpaceX Starship Super Heavy launching from sea platform by Roger Bootsma

Austrian 3D environment artist Roger Bootsma has created his vision of SpaceX's Starship Super Heavy launching from sea launch/landing platform. More of his art here. When operational Starship Super Heavies will most likely launch from sea platforms or unpopulated remote locations because of the high noise level during the lift-offs which requires ~30km exclusion zone around the launch site.

Renders of SpaceX Starship SN8 launch, landing and mid-flight by Bart Caldwell

American space artist Bart Caldwell, known on Twitter as Neopork, recently has created some of the best and most detailed renders of SpaceX's Starship. His renders looks almost as actual photos. Here are his renders of Starship SN8 test vehicle in launch, landing and mid-flight configuration in the sky above Boca Chica, Texas.

The first two are created as mobile wallpapers. You can download them in even higher resolution here.

SpaceX Starship SN8 belly flop maneuver by Bart Caldwell

Picture of the Day 10/10/2020 - SpaceX's Starship SN8 test vehicle performing its "skydiver" belly flop maneuver in the sky above Boca Chica, Texas by American space artist Bart Caldwell, known on Twitter as Neopork. The render is so detailed that it looks almost as an actual photo!

SpaceX Starship at NASA Artemis Base Camp by ICON

NASA has announced it is working with Texas-based 3D printed construction startup ICON "on early research and development of a space-based construction system that could support future exploration of the Moon and Mars. The company has 3D printed communities of homes and structures on Earth and participated in NASA’s 3D-Printed Habitat Challenge, demonstrating a construction method and technologies that may be adaptable for applications beyond our home planet." Both NASA and US Air Force have invested in company's technologies via Small Business Innovation Research (SBIR) contract.

NASA is working, via its Artemis program, to establish a long-term human presence on and around the Moon by the end of the 2020s. Construction and expansion of Artemis Base Camp will require extensive use of lunar resources, including water ice (for life support and rocket fuel) and moon dirt (for building materials).

To accomplish goals of the SBIR contract ICON has teamed up with space design studio SEArch+ and Danish architecture firm BIG in Project Olympus to develop robotic construction concept for NASA's Artemis Base Camp. Here are several conceptual illustrations from the project.

First one depicts a spaceport featuring several 3D printed landing pads and roads, SpaceX's Starship in one of the pads and Blue Origin's Lunar lander with ICON's 3D printer landing in another:

Closeup of illustration's central part:

Here are illustrations of 3D printed habitats: